|
|
Development of a universal cell for optical part inspection in a robotic workplace
Cahlík, Radim ; Rajchl, Matej (referee) ; Adámek, Roman (advisor)
Cílem této diplomové práce je vývoj univerzální buňky pro optickou kontrolu včetně softwaru pro detekci vad, který používá metody umělé inteligence. Dalším cílem je integrovat buňku do robotického pracoviště a otestovat ji na rozdílných dílech s různými vadami. První část práce popisuje vývoj konceptu optické buňky a její návrh. Poté pojednává o systému pro optickou kontrolu, počínaje popisem objektivu a kamery a konče analýzou kontrolního softwaru, který pro detekci vad využívá konvoluční neuronovou síť. Další část se zabývá vývojem robotického pracoviště včetně návrhu dvojosého robota a komunikace mezi zařízeními. Nakonec je rozebráno testování na dvou rozdílných dílech s cílem ověřit funkčnost.
|
|
|
Design of the robotic work cell for the spot welding
Hrubeš, Kryštof ; Szabari, Mikuláš (referee) ; Bražina, Jakub (advisor)
This work deals with the design and creation of a virtual simulation of a robotic workplace for spot welding in the Tecnomatix Process Simulate. The aim of the work is to get acquainted with the issues of robotic workplaces, especially in the field of spot. Then, based on this knowledge, design a robotic work cell for welding two sheets. The whole process will then be simulated in the Tecnomatix Process Simulate and this simulation will serve as a demonstration in teaching.
|
|
|
Digital commissioning of robotic machine tool operator
Tecl, Michal ; Szabari, Mikuláš (referee) ; Vetiška, Jan (advisor)
The diploma thesis deals with the issue of digital commissioning of robotic operation of CNC machine tools. In the research part, individual types of industrial robots are analysed, including their advantages and disadvantages for the given application. Furthermore, several software used for digital commissioning are described and the possibilities of communication between machine tools and robots are described. In the practical part, a model task of operating two CNC machines is created. A suitable robot, robot tools, part magazines are selected, and a 3D model of the entire workplace is processed. In the final part, both a program for the robot and a program for the PLC controlling the entire workplace will be created.
|
|
|
Design of a Robotic Cell for Injection Molding Machines Operations
Franc, Vladimír ; Kubela, Tomáš (referee) ; Pochylý, Aleš (advisor)
The aim of this thesis is to design a robotic cell for automated injection molding operation. At the beginning of this paper, the input parameters and the assignment are analyzed. This is then followed up by the layout of the workplace, design of its equipment, selection of robots and the design of their end effectors and peripherals with regard to the specified boundary conditions and operator’s safety. The output of this work is a 3D cell model and its simulation model in PLM software Siemens Process Simulate, which verifies the production cycle time.
|
|
|
Digital commissioning of a robotic production system for resistance welding
Šuba, Marek ; Bražina, Jakub (referee) ; Vetiška, Jan (advisor)
The subject of this diploma thesis is the simulation and digital commissioning of a robotic production system for welding elements such as studs on sheet metal parts. The basis of the work is search of information related to industrial robots, PLC control, tools used for welding, fixtures, manipulators, sensors, safety and protection elements commonly used in such production systems. The second part of the work deals with the given problem and it is a virtual commissioning of the given concept of a robotic production system. This means creating its simulation model in the Process Simulate environment, selecting robots, creating robotic trajectories, collision analysis, creating sensors, signals and optimization. Last part includes the connection of the simulation model with the software S-7PLCSIM Advanced and TIA Portal, the creation of control PLC logic in the form of a program, visualization and verification of their functionality using the above-mentioned connection with the simulation model.
|
|
|
Design of end effector for a robotic cell
Machala, Lukáš ; Pavlík, Jan (referee) ; Tůma, Zdeněk (advisor)
This Master´s thesis deals with the design of end effectors for object manipulation within robotic cell located at the Department of Production Machines, Systems and Robotics, Brno University of Technology. The theoretical part of the work is devoted to a summary of the current state of knowledge in the field of end effectors. The practical part deals with draft of several variants of the solution, from which is chosen optimal variant by the method of multicriteria analysis, after which follows the construction of individual end effectors. The work includes individual 3D models of these end effectors and a rack for their storage, the work also includes assembly and part drawings. The work ends with an economic evaluation, discussion of achieved results and a conclusion.
|
|
|
Design of measurement robotized workcell
Tvardek, Michal ; Sláma, Josef (referee) ; Knoflíček, Radek (advisor)
This master's thesis focuses on the use of the Renishaw's Equator gauging system in cooperation with the industrial robot. The target is to design the robotized workcell which contains these two products. Robot acts as a manipulator for inserting and sorting out the workpieces into the "good" and "bad" pallets according to measured results from the Equator. Equator uses a parallel kinematics and probing system which is normally used on coordinate measuring machines. Therefore there is the introduction to the parallel and serial kinematic structures, to the problems of the coordinate measuring machines in the first part of this thesis. It was made a separation of the probing systems into a few basic categories, description of the typical representatives of these categories and of the other important accessories of the coordinate measuring machines, too. The second part of the thesis contains a description of the Equator gauging system, the industrial robot which I used and their accessories. In this part is mentioned a few examples of measurement automation in industry practice, too. The third part devotes to the design of the robotized workcell and contains all the important requirements for the realization.
|
|
| |
|
|
Design of welding cell
Šuba, Marek ; Kočiš, Petr (referee) ; Vetiška, Jan (advisor)
The topic of this bachelor's thesis is the design of a robotic cell for spot resistence welding of sheet metal parts. The base of this thesis will be the research of industrial robots, spot welding guns, welding fixtures, robot grippers, sensors and safety precautions used in such robotic cells. Second part of the thesis contains few concepts regarding the robotic cell itself and the choice of the best one for the situation at hand. Third part of the thesis contains the choice of welding guns, construction of the welding fixtures and possibly even robot grippers for the given metal sheet parts. In the last part of the thesis comes the simulation of the welding process in RobotStudio (software from ABB), check whether the robotic cell meets the requested production time needed and a final assessment of the results.
|
|
|
Calibration of Robotic Workspace
Uhlíř, Jan ; Veľas, Martin (referee) ; Kapinus, Michal (advisor)
This work is concerned by the issue of calibrating a robotic workplace, including the localization of a calibration object for the purpose of calibrating a 2D or 3D camera, a robotic arm and a scene of robotic workplace. At first, the problems related to the calibration of the aforementioned elements were studied. Further, an analysis of suitable methods for performing these calibrations was performed. The result of this work is application of ROS robotic system providing methods for three different types of calibration programs, whose functionality is experimentally verified at the end of this work.
|
guest ::
